Grease

JETEX BRG – 400 (Heavy Duty / High Temperature Grease)

Use successfully for roller bearings, all types of antifriction bearings, plain bearings, guides, threaded spindles, splines shafts, taper bearings, needle roller bearings, ball and socket joints, sliding andmating surfaces under vibratory or reciprocatingmotions, journal bearings, couplings. For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills. For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Method of Application

Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

JETEX BRG – 500 HT (Non-Melt / Non-Drip Grease)

Use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings. For heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery. For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Method of Application

Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralized lubrication systems. Do not mix with other oils or grease.

JETEX - FMG – 60 (Extreme Temperature / Heavy Duty Grease)

A Highly concentrated dispersion of Molybdenum disulphide super fine power dispersed in low carbon forming carrier, blended with E.P. Additives. It operates under extremes of load and temperature without getting carbonised, eventually leaving a film of solid Molybdenum disuphide on the working surface. It is also extremely resistant to Butane, Propane and Town Gas, hence ideally suitable for gas distribution system. Temperature range : (-400C to 4000C).

Method of Application

Slow moving parts subjected to very heavy loaded and temperature like Journal bearings, Over chains, Turntables, Soot blowers, Furnace foors, etc. Taps, Valves and Cocks of gas pumping units.

JETEX - DRYBOND – 100 (Dry Film Lubricant)

Sliding coating of metal to metal combinations with slow to moderately fast movements and moderate to high loads. Suitable for highly stressed sliding areas with low sliding speeds, oscillating movements or intermittent operations. For improving the running-in process,for permanent lubrication at high temperatures and also where oils and greases cannot be used. Used successfully for piston rings and tappets of combustion engines, magnetic armatures of vehicle starter motors, parts of vehicle brakes, locks, hinges and pumps. Corrosion protector for hydraulic and pneumatic parts.

HOW TO USE Surface

Preparation

First clean and degrease the surface which will be coated with JETEX DRYBOND-100 MOS Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.

How to apply

Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm

JETEX CG – 300 (Multipurpose Graphite Grease)

It is a heavy duty grease with high quality lubricating graphite flakes and anticorrosive additives to withstand heavy loads in humid and hostile environment. It is highly adhesive and does not get washed away when exposed to water and weather. Also being electrically conductive, It can be recommended for heavy electrical applications.

AREA OF APPLICATION

Heavily loaded plain and anti-friction bearing, Open gears, Wire ropes, Plungers, Guides, Conveyors, Loaded turn tables, Bearing of ERW m/cs.

JETEX GMP-50 PATE - Moly, Graphite Based Antiseize Assembly Paste

Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

HOW TO USE Surface

• • As a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.
• • As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
• • For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splines shafts, pumps, valves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.
• • As a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling, cold heading, waging and forging.
• • As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
• • As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
• • As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.

JETEX EC – 424 (Electrical Contact Grease)

Ir is a very heavy duty semi fluid adhesive grease with high quality of lubricating graphite flakes to provide high antiwear and load carrying capacity. It is blended with additives such as rust and corrosion inhibitors and anti oxidants to provide an unusually good water repellency for rust protection and oxidation stability for high temperature and heavy duty applications. Temperature range (-200C to 1500C).

AREA OF APPLICATION

Slow moving heavily loaded plain and antifriction bearings, Large Open Gears, Wire ropes, Chains, Conveyors, Elevator plungers, Hoisting engines, Winches and other equipment exposed to water and weather.

JETEX SWR - 12 (Multifunctional Silicone Grease)

It is a synthetic grease compounded from fortified silicone oil thickened with a special lithium soap and E.P. Additives to meet the most critical Industrial applications, It is ideally suitable for very high speed and high temperature applications. It possesses an excellent resistance to oxidation in corrosive atmosphere annd break down due to shear. It has outstanding water repellency characteristic for marine and humid atmosphere. It is far more inert and heat stable making it a life long lubricant. It is ideal for low torque bearings.

AREA OF APPLICATION

All types of anti-friction Ball and Roller bearings, Sleeve bearings and needle bearings operating under very high speeds and high temperatures, For Steam joints and Submersible pump bearings, water turbines, Conveyor systems, Electric motors of class “H” insulations. Washing machines, Domestic appliances etc.

JETEX SWR – 41 (High Temperature Silicone Grease)

A black silicone grease fortified with anti-corrosive and E.P. Additives withstanding very high temperature making it suitable for wide range of industrial applications, It is also electrically conductive, hence recommended for electrical contact applications.

AREA OF APPLICATION

All types of anti-friction Ball and roller bearings, Operating at medium speeds and very high temperatures, Governor linkages, Ball and Sockets, Switchgears, Contactors, OLTCs etc.

JETEX SWR-45 COMPOUND - Mould Release Agent

Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.

HOW TO USE Surface

• • Wide service temperature range from -40°C to +204°C
• • Very low volatility
• • Very good thermal and oxidation stability and minimises build up on mold
• • Nontoxic, non melting and odourless
• • Chemically inert and does not react with plastics and metals
• • Suitable for high temperature moulding operations
• • Excellent release properties increases production output while minimising rejection
• • Resistant to water
• • Does not dry out

JETEX HVG - 200 (High Vacuum Grease)

It is a high vacuum non- melt Silicone grease. It is heat stable and maintains its consistency over a wide temperature range, and is an excellent chemical resistance stop-cock grease. It is highly adhesive and water repellent making it suitable for wide range of industrial applications.

HOW TO USE Surface

In high vacuum systems, Laboratory and Industrial stop-cocks for chemical duty, Sealant for air-lines control valves and pneumatic systems, Mould release agent to Epoxy, olystyrene, PVC and other Thermoplastics.

JETEX HVG - 200 (High Vacuum Grease)

Sealant-cum-Lubricant) A Silicone based compound acting as an excellent water repellent Dielectric Sealant-cum-Lubricant. It has very good oxidation resitance at high temperature, making it suitable over a wide working temperature range. A fine film of JETEX SLC-65 is sufficient to prevent flashovers, corona discharge and tracking, thereby minimizing electrical leakage. It is compatible with all insulating materials.

HOW TO USE Surface

As a dielectric sealant / Lubricant in electrical insulators, Battery terminals, Cable and cable connectors, EHT connections, Electronic components and lgnition systems of automobile Plastic and rubber components.

JETEX SWR -400 (Plastic & rubber Lubricant)

It is a synthetic Grease specially developed for the lubrication of plastics, Rubber & metal components and part which are normally fitted to office equipments, domestic appliances, mechanical toys & gadgets etc. The Synthetic grease is so chosen that it has an excellent compatibility with most rubbers, plastics, metals, composites & polymers. It is meant to give life-time lubrication to all such equipments mentioned above under extremely fluctuating temperature range from (-450C to 1800C). It can carry heavy loads & can resist rust & corrosion under humid environment. It has a very low co-efficient of friction and a very low starting torque required to lubricate instruments and switches for intermittent operations.

HOW TO USE Surface

All Mechanical & Electrical applicances. Office equipments, Computers, Telephones, Electro-mechanical gadgets and toys. Contact switches, Relays, Pneumatic Systems, Rubber Seals, Gaskets, Composite Bearings, Plastic & Polymer Gears, Bearings, Linkages, etc.

JETEX PHG - 200 (Solvent Resistant Grease)

A specially formulated solvent resistant synthetic grease with special chemical additives like rust and corrosion inhibitors, friction modifiers and E.P. Additive to provide excellent repellency for rust protection and high antiwear and load carrying capacities. It is extremely resistant to all types of solvents and does not get dissolved in presence of them. It also acts as a soft sealant to prevent leakages os solvent vapour.

HOW TO USE Surface

DT bearing Extractor bush, Pumps, Solvent tight conveyors. All joints, etc. In vegetable oil solvent extraction and chemical plants.

JETEX BRG – 575 HTS (High Speed Grease)

It is a synthetic fluid grease specially formulated with highly stable chemical additives for high speed operations. These special chemical additives reduce the fatigue and abrasive wear considerably under extreme dynamic load conditions where operating speeds and temperature are too high. It is ideally suitable for Centrailised lubrication system where fluid greases are required to reduce their internal friction and pumping losses.

HOW TO USE Surface

Centralised lubriction systems. FHP motors, Instrument bearings, Gear couplings, Internal grinders, Universal joints, Hand – tools etc.

JETEX PHG – 500 HT (High Temperature Grease)

It is a specially formulated complex soap based grease with special additives to withstand extreme loads and temperature in acidic and alkaline environment in chemical plants and process houses. It is ideally suitable for lubrication of heavily loaded bearings subjected to high temperatures. It is highly adhesive, friction – reducing, water repellent grease suitable for variety of Industrial applications.

HOW TO USE Surface

Heavily loaded bearings exposed to corrosive entironment at high temperatures like in Sizing cylinders, Calender bearings etc.

JETEX SFG 100 (Non – Staining Grease)

It is a white grease specially developed where staining from lubricants is not tolerable (e.g. Textiles) with E.P. Additives. JETEX SFG-100 has been frmulated to give better performance at high speeds with good tolerance to humidity. It is specially recommended for textile looms and process machinery.

HOW TO USE Surface

All types of anti-friction bearings, Open gears, Chains and Sliding surface where staining of lubricant is not tolerable, Centralised lubrication system.

JETEX PSR - 300 (High Speed Semifluid Grease)

It is a synthetic fluid grease specially formulated with highly stable chemical additives such as rust and corrosion inhibitors and antioxidants to provide good water repellency for rust protection and oxidation stability for high temperature performance. They also reduce the fatigue and abrasive wear considerably under extreme dynamic load condition where operating speed is very high. It is ideally suitable for centralised lubrication systems.

HOW TO USE Surface

Centralised lubrication system of Offset printing presses, Internal Grinders, Worm gears, Gear couplings, Universal joints, Instrument bearings etc.

JETEX LG - 101 (Liquid Grease)

It is a semifluid, complex soap based high grade grease specially selected for its excellent response to variable speed drives to provide high antiwear and load carring capacities to the grease. It is also fortified with synergistic blend of other additives such as rust and corrosion inhibitors and antioxidants to provide an unsually good water repellency for rust protection and oxidation stability for high

HOW TO USE Surface

Variable speed drives in enclosed gear boxes, PIV Gears and gear couplings, for high speed semi - automatic power tools and packaging machines in pharmaceutical and metal working industries.