The textile industry is demanding high-temperature chain oils offering ever higher thermal stability and longer relubrication intervals. With these requirements in mind, we developed our synthetic high-temperature chain oil Klübersynth CTH 2-260. Klübersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. Klübersynth CTH 2-260 has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. Klübersynth CTH 2-260 also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation. Due to the low evaporation losses and the good antiwear effect, Klübersynth CTH 2-260 enables longer relubrication intervals and consequently lower operating costs.
Klübersynth CTH 2-260 can normally be used to replace other Klüber Lubrication chain oils without specific preparations. It is miscible and compatible with our chain oils so under normal operating conditions the chain system does not require prior cleaning. Oil reservoirs, however, should be completely drained prior to filling them with Klübersynth CTH 2-260. Klübersynth CTH 2-260 can be applied by means of customary pumping, spraying and metering equipment provided the manufacturers' viscosity instructions are observed. Lubrication intervals and quantities are determined by the chain design,lubrication technique and the variable operating conditions. At operating temperatures > 180 °C, chain oil consumption instenter chains will be at approx. 1.5 to 2 ml of oil per chain